Laser Video-wall

Laser Based Video walls

The laser-based DLP™ Video wall offers, ultra high brightness, high contrast ratio and full light source redundancy compared to LED based DLP Video walls. The laser based DLP™ Video wall offers an array of additional benefits – in increased performance, lower cost of ownership and energy saving.

Hot swappable power supplies

True to Delta’s mission of offering energy-efficient solutions, Laser based Video walls have in-built hot swappable power supplies which ensure high transfer efficiency and lowers power consumption.

True Redundancy

Boasting of a redundant light source and redundant power supply, 80” rear access laser based Video walls assures no downtime and is most suitable for spaces which demand 24/7 operations.

High performance DLP image quality

Boasting of high Contrast ratios, (1,500,000:1), the 80" Rear Access Laser based Video wall delivers crisp, sharp whites and deep dark blacks producing 3D-like images.

Pixel perfect uniformity

An auto-color calibration system continuously monitors sensors in real time and automatically adjusts the color temperature and brightness in a video wall, ensuring control room operators’ view a perfectly uniform image across the entire screen at all times.

Best-in-class reliability

The unique combination of DLP™ expertise, in-house design and Delta’s unrelenting drive for quality and perfection ensures the 80" rear access Laser based Video wall delivers the highest levels of reliability.

Six-axis adjustment base for pixel-perfect alignment

The projection engine of 80" rear access Laser based Video wall is mounted inside the cube on a six-axis adjustment base, which provides the ability to make precise geometric adjustments in six directions to obtain pixel-perfect alignment between individual cubes.

Advanced screen design

The standard screen used on the 80" rear access Laser based Video wall offers unsurpassed contrast, wide viewing angles and superb centre-to-corner brightness uniformity.

Model	80” Rear Access Laser Video wall
Description	Laser Light Source SXGA+ Cube
Individual Cube Size	80" Diagonal
Image Size (mm)	1600 x 1200
Display Technology	DLP, single chip
Native Resolution	1400 x 1050 pixels
Aspect Ratio	4:3
Screen to screen gap	Adjustable up to 0.2 mm
DMD	DMD Chip
Light Source	Laser
Brightness-Typical	1800 Lumens
Contrast Ratio	Typical 1800:1
Luminance (Nits or cd/m2)	Varies with the screen type
Brightness Uniformity	up to 96%
Screen Options	FXS / XPS / High Gain
Full Viewing Angle	180 degrees
Colors	16.7 million
Color Temperature Range	3200K to 9300K,Custom
Laser Lamp Life	Eco Mode: 60,000 hours
Standard Inputs	1x Digital DVI-I 1x Digital HDMI 1x Analog D-sub 15pin 1x Analog 5BNC (RGBHV or YPbPr)
Optional Board- I*	Inputs:1x Digital DVI-D 1x HDMI 1x Display port 1x Analog 5BNC (RGBHV or YPbPr) 1 X Analog S-video
Optional Board- II*	Inputs :1x Digital DVI-D 1x 3G-SDI 1x Display port 1x Analog 5BNC (RGBHV or YPbPr) 1 X Analog S-video Output : 1 x 3G-SDI
Optional Board- III*	Inputs:1x Digital DVI-D 1x HD-baseT 1x Display port 1x Analog 5BNC (RGBHV or YPbPr) 1 X Analog S-video
Standard Outputs	1x Digital DVI-D
Control Options	RS-232 / RS-422, IP, IR
Input Voltage	AC 90-240V @ 50/60 Hz
Power Consumption	Normal Mode: Typ. 220 W
	Eco Mode: Typ. 130 W
Power Supply	Dual Power supply available as an option
Operating Temperature	5°C-40°C (41° F - 104° F)
Non-Operating Temperature	-20°C - 60°C (-4°F - 140°F)
Operating/Storage Humidity	10% - 90%, non-condensing

Laser Video wall brochure

Click to download